A globe valve can be rotated 360 degrees to open or close off a pipe. The packing washer is usually the main source of leaks. Follow the steps below to repair a leaking globe valve.

• Adjustable pipe wrench
• Screwdriver
• New packing washer

Use the shut off valve to cut off the water to the valve. Open the valve to release pressure.

Use the adjustable pipe wrench to undo the bolts that hold the body of the globe valve into its upper covering, called a bonnet. There should be at least 2 bolts, more if the globe valve unit is large. Use the screwdriver to pry the valve from the bonnet.

Check the packing washer for corrosion or loose fit. If it is damaged, replace it with a new washer. If it is intact, check the gasket and the seat of the globe valve for leakage problems.

MORE NEWS