Globe Valve Series

Product drawing»

Structural drawing»

News > News Detail

the principle of globe valve

2012-04-28

 Globe Valve is a type which disc along the valve seat centerline movement. Its very suitable for control the medium, because of this type of valves stem opening or closing at a short trip, and it has very reliable breaker function. Therefore, this type of valve is suitable for cutting, adjusting and throttling the medium. The selection principle of  Globe Valve is as follow:

1, pipeline of media with high-temperature and high-pressure should be chosen globe valves.

2, used for the pipeline which is not care of flow resistance
3, for small valve, one can choose needle valve, instrument valve, sampling valve, etc.

4, flow regulating or pressure regulation, but for regulating accuracy is not high, and the pipe diameter and less than 50, such as nominal breath, appropriate chooses.

5, in the construction of urban water supply and heat supply engineering, can choose the globe valves, balance valve or piston valve, such as the piping less than DN150. The most obvious advantage is: between the process of the open and closed, the disc in the friction between the smaller than gate valves, so it is more wear-resisting. Usually there is only one sealing face in the valve body and disc, so it is convenient when maintenance.

 

 

forged Gate, Globe, Check Valves

Resilient Seated Gate Valves

Butterfly Valves

Needle & Gauge Valves

Cast Steel Valves

Shanghai MeiYan Yi Pump & Valve Co., Ltd.
MeiYan Yi globe valve Contact MeiYan Yi
Shanghai Enine Pump & Valve Co., Ltd.
Enine globe valve Contact Enine
Shanghai Saitai Pump & Valve CO., Lid.
Saitai globe valve Contact Saitai
Shanghai Fengqi Industrial Development Co., Ltd.
FengQi globe valve Contact FengQi