Yibengfa J44H-16P Angle Globe Valve: Pressure-Temperature Parameters and Installation Guide
In the model code, J denotes a globe valve, 44 indicates the angle-pattern flanged design, H signifies a hardfaced (Cr13 stainless steel) sealing surface, and 16P designates a PN16 rating with a stainless steel (CF8) body. The Yibengfa name operates as a valve industry platform rather than a single manufacturing brand, but the parameters below reflect the standard J44H-16P specification shared across reputable Chinese valve makers.The main globe valve product names of China globe Valve Network include:ANSI Flange Straight-through Globe Valve,ANSI Flange Straight-through Bellows Globe Valve,Angle-type Ammonia Globe Valve,DIN Angle-type Bellows Globe Valve,Electric Flange Straight-through Globe Valve,External Thread Ammonia Globe Valve,Electric Cast Steel Self-sealing Tightly Globe Valve,Flange,Welding Water Sealing Globe Valve,Flange Straight-through Copper Globe Valve,Forged SteelStraight-through Globe Valve,Flange Straight-through Ammonia Globe Valve.
Pressure and Temperature Parameters
The nominal pressure is PN16 (1.6 MPa). The shell (strength) test pressure is 2.4 MPa, and the seal test pressure is 1.76 MPa. The applicable working temperature for the standard stainless steel variant is up to 350 degrees Celsius, suitable for media including water, steam, oil products, and mildly aggressive liquids. The valve body is CF8 (304) stainless steel, the disc sealing surface is hardfaced, and the stem is typically 2Cr13 stainless steel. The design and manufacture follow GB12233 or GB12235, with face-to-face dimensions per GB12221 and flange connection per JB/T79 or GB9113.
Angle-Pattern Design Advantage
The 90-degree inlet-to-outlet geometry eliminates the need for a separate elbow at pipeline corners, saving installation space and reducing the number of joints. Fluid changes direction only once through the valve, resulting in lower pressure drop than a conventional straight-through globe valve combined with an elbow. The valve is a forced-seal design, meaning the disc must be pressed firmly against the seat to achieve shutoff; it is intended for fully open or fully closed service and is not suitable for throttling or flow regulation.
Installation Procedure
Pre-installation inspection. Verify the nameplate matches the pipeline requirements for diameter, pressure class, and body material. Clean the pipeline thoroughly to remove weld slag, scale, and debris before installing the valve.
Flow direction. The medium flow must match the arrow direction cast on the valve body. Do not reverse the valve, as the forced-seal geometry is designed for unidirectional flow.
Orientation. Handwheel-operated angle globe valves may be installed in any position on the pipeline. For larger sizes or where vibration is present, provide a support bracket. The handwheel and actuating mechanism must never be used as lifting points.
Flange alignment and bolting. Ensure the valve flanges are concentric with the pipe flanges. Tighten the bolts in a diagonal, crisscross pattern to avoid distorting the body and causing seat leakage.
Commissioning. Operate the handwheel through several full open-close cycles. The valve reaches its full-open position when the disc lift equals 25 to 30 percent of the nominal diameter; beyond this point, no additional flow gain is achieved. Do not force the handwheel beyond the closed position, as over-torque can damage the sealing surfaces.
Summary
The J44H-16P angle globe valve combines a PN16 rating, 350-degree Celsius temperature capability, and a space-saving 90-degree body with hardfaced sealing for steam, water, and oil service. Correct installation depends on matching the flow direction to the body arrow, maintaining flange concentricity, and operating the valve only in fully open or fully closed positions. For project procurement, confirm the manufacturer's material certificates and pressure test reports, as temperature ratings and body materials may vary between suppliers.
Do you still need to know or purchase the following globe valve products:
