High-Pressure Hydraulic Oil Forged Steel Globe Valve Manufacturers: A105 Material
ASTM A105 forged carbon steel has become the standard material for small-bore hydraulic oil isolation valves because the forging process eliminates the internal cavities and porosity inherent in castings, producing a dense, homogeneous body with reliable pressure integrity.The main globe valve product names of China globe Valve Network include:Forged SteelStraight-through Globe Valve,Flange Straight-through Ammonia Globe Valve,Flange Fluorine-lined Globe Valve,Flange Straight-through Low Temperature Globe Valve,Flange Straight-through Throttle EmptyingGlobe Valve,Flange, Internal Thread Straight-through Plastic Globe Valve,GB Cast Steel Flange Globe Valve,GB Stainless Steel Flange Globe Valve.
Why A105 Forging Suits Hydraulic Oil Service
A105 is a carbon steel grade specifically normalized for high-temperature service, with a tensile strength of approximately 485 MPa and a yield strength of 250 MPa. When forged into a globe valve body, it delivers structural density that cast carbon steel cannot match, making it the industry standard for high-pressure small-bore piping where zero leakage is mandatory. For hydraulic oil service, A105 is compatible with petroleum-based fluids, and the valve’s sealing system must be matched to the oil chemistry—NBR is the industry standard for mineral hydraulic oils, while PTFE seats and seals offer broader chemical compatibility and lower friction for demanding circuits.
Manufacturers and Product Specifications
Zhejiang Chenggong Valve Technology supplies API 602 A105N forged steel globe valves rated to Class 800–2500, with sizes from 1/2 to 2 inch and temperature range of -29 to 425 degrees Celsius. The valves are tested to API 598 and available with NPT, socket weld, butt weld, or flanged ends.
KSB manufactures the ECOLINE GL 800 forged globe valve to API 602, with an A105 body, Stellite/13 percent Cr trim, ASME B16.34 pressure-temperature ratings, and API 598 testing. The valve is rated for Class 150 through 800 and is specified for oil, water, and steam service.
Wenzhou Zoncic Machinery produces A105 forged globe valves in sizes from 1/4 to 2 inch, rated for Class 800, 1500, and 2500. Design standards include API 602, ASME B16.34, and BS 5352, with an applicable temperature range of -46 to 600 degrees Celsius.
Spirax Sarco offers the J61Y and J41Y series forged steel globe valves designed to API 602, with A105 integrally forged bodies and bonnets, rated from Class 150 to 2500 and sizes from 1/4 to 2 inch. Sealing surfaces are available in Cr13 stainless steel or Stellite hard alloy.
Alco Valves manufactures the Y1 series Y-pattern bonnetless forged globe valve in ASTM A105, rated to Class 4500, with a temperature range of -29 to 425 degrees Celsius and Stellite trim.
Selection Guidelines
For hydraulic oil service, confirm the pressure class matches the circuit’s maximum working pressure, with Class 800 and above being common for high-pressure systems. Specify NBR seals for petroleum-based oils or PTFE for broader fluid compatibility and reduced friction. Verify that the manufacturer provides API 598 test reports and material certification for the A105 forging. For critical circuits, request documentation confirming the body has no porosity and the stem packing is compatible with the hydraulic fluid.
Summary
A105 forged steel globe valves provide the density, pressure integrity, and material traceability required for high-pressure hydraulic oil isolation. Manufacturers including Zhejiang Chenggong, KSB, Zoncic, Spirax Sarco, and Alco supply API 602 and ASME B16.34 compliant valves in Class 800 to 4500 ratings. Selection should focus on pressure class, seal material compatibility with the hydraulic fluid, and verified forging quality.
Do you still need to know or purchase the following globe valve products:
