Y Globe Valve are available in a number of stem opening positions to flow characteristics defined by the coefficient of variation (CV), or base flow characteristic, and shape of the valve plug and sea

1.Globe valves are normally installed with flow and pressure under the disc. Always check with the manufacturer before installing valves with flow in the other direction.Under certain service conditio

Globe valves are named for their exterior shape, which is round and globular, and not in accordance with any characteristic of the internal structure of the valve itself, such as is the case with gate

Cast steel globe valve are also known as stop valve, which is one of the most widest-used valves. The reason why globe valves are popular is because that the friction force is small during the opening

Very common use of globe valve, opening and closing torque, the structure length is longer, usually nominal diameter is limited to 250mm below, to 400mm, but the selection should be special attention

Steel globe valve is proper for regulating the flow resulting from its specified structure and operating mode. The Globe valve refers to the valve whose disc moves along the centerline of the valve se

The globe valve is composed of a baffle that splits the indouble flanged butterfly valveside of the pipe, which is typically parallel to the pipe

Globe valves are preferably installed with the higher-pressure side connected to the top of the disk. Exceptions occur (1) when blocked flow caused by separation of the disk from the stem would damage