News
News
By-pass valve - CV vs Size 2010-11-11
The basic studies have been performed by another company.My problem is that i have the following list of CV and sizes for by-pass valves and i want to know wich manufacturer and which type of valve ha
Centered vs eccentric Fuel Oil Butterfly Valves 2010-11-11
Our supplier of remote controlled stainless steel butterfly valves made a mistake and sent us centered instead of eccentric butterfly valves used in the oil/chemical cargo lines.
Impact type handwheel 2010-11-11
can you please help me to understand what is thr meaning of "Impact Type Handwheel" for gate valves.An impactor handwheel has a crossarm that is directly coupled to the valve stem.
Butterfly valves with electrical actuator 2010-11-11
The technical specifications in my water project call for butterfly valves operating with manual hand wheel actuators, BUT valves shall have provision for electrical actuators . my concern is about th
B16.34 wall thickness/ B16.5 flange hub diameter 2010-11-11
1. Table 3-B gives valve body minimum wall thicknesses based on inside diameter. I believe these values are based on a 30k min yield material.
B16.34 Xray tables % ASTM E-446 2010-11-11
According to B16.34 there are 3 tables that define an acceptable casting, the tables are divided up by wall thicknesses .
Collar ring in a Exteneded Bonnet valve 2010-11-10
For Cryogenic valves clinet has a requirement for the "Collar rings" at the extended bonnets.
Needle Valve Inquiry 2010-11-10
I inquire needle valve manufacturers for Class 4500 pressure ratings.(For example Fujikin needle valve)Please verify that you require needle valves rated 4500 psig or other such rating as well as the